BBFZJ - PLASTIC STEEL A HARDNER

  • MSDS: BBFZJ
  • Manufacturer: DEVCON
  • Product Name: PLASTIC STEEL A HARDNER
  • National Stock Number: 8030-00F000158
Product Identification

Product ID:PLASTIC STEEL A HARDNER
MSDS Date:01/01/1985
FSC:8030
NIIN:00F000158
MSDS Number: BBFZJ

Responsible Party
DEVCON

Emergency Phone: 617/777-1100

Cage: 16059

Contractor
DEVCON CORP
DANVERS, MA 01923-3753 US

Telephone: 1-508-777-1100

Cage: 16059

Ingredients

POLYAMIDE RESIN

Fraction By Weight: 60%


DIETHYLENE TRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 35%

OSHA PEL 1 PPM

ACGIH TLV: S, 1 PPM; 9192

Hazards

Effects of Overexposure:RESPIRATORY IRRITATION, MAY CAUSE ASTHMA.
SEVERE SKIN IRRITATION OR BURNS IF NOT REMOVED PROMPTLY

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH CLEAR WATER
FOR AT LEAST 15 MINUTES. CONSULT A PHYSICIAN IMMEDIATELY. SKIN:
WASH WITH SOAP AND WATER.

Fire Fighting

Flash Point:215F C.C.C.
Lower Limits:1.4
Upper Limits:9.2
Extinguishing Media:CO2 OR DRY CHEMICALS, POLYMER FOAMS FOR LARGE FIRES
Fire Fighting Procedures:RESPIRATORY PROTECTION ADVISED;DILUTION W/H20
REDUCES FLAME
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:AVOID SKIN CONTACT. ABSORB WITH SWEEPING
COMPOUND OR OTHER ABSORBENT MATERIAL AND DIARD.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE. WASH HANDS
THOROUGHLY AFTER USE. USE ADEQUATE VENTILATION AND AVOIDROLONGED
AND REPEATED BREATHING OF VAPORS.

Exposure Controls

Respiratory Protection:NONE IN NORMAL USE.
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:RECOMMENDED
Supplemental Safety and Health
30 ENDICOTT STREET/DANVERS, MASSACHUSETTS 01923.

Chemical Properties

Boiling Pt:B.P. Text:405F
Vapor Pres:0.3
Vapor Density:3.5
Spec Gravity:1.04
Solubility in Water:COMPLETE
Appearance and Odor:AMBER GEL, AMMONIACAL ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
CONTAMINATION WITH ACIDS
Stability Condition to Avoid:OPEN FLAME OR EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:BURIAL IN APPROVED CHEMICAL LANDFILL OR IN
ACCORDANCE WITH STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.